Olson Kustom Works -
Products/Instructions





















We carry a wide range of LS-Based products to suit a variety of budgets and projects. Our most popular products are shown below. Please call or stop by for more information on products, current promotions and custom options. Please contact us to place any orders, we do not have any type of web store. All of our orders are placed via PayPal or credit card over the phone, or through FB messenger. 

1/2" LSA Billet Cathedral Adapters
1/2" LSA Billet Cathedral Adapters
Following the flagship spacers, is the little brother. For installs that need more clearance, or just want a slimmer look, these are a great option. These are 100% designed and manufactured in house, not relabeled products.These spacers are the originals, which are are being copied, and sold as knock offs on ebay and amazon for MORE money. Each BILLET spacer kit comes with bolts, instructions, and factory LS1/2/6 style intake gaskets.

Pricing:
Billet: $200
Phenolic: $240
(Phenolic leads times are slightly longer)
=====================================
Square Port Heat Insulation Plates
Square Port Heat Insulation Plates
These phenolic plates keep the heat in the cylinder heads from soaking into the blower case, leading to longer life for the blower and lower IATS!! We make these in cathedral to cathedral, and square port to square port, as well as the conversion plates listed above. Comes with longer bolts and instructions.

Pricing:
$200 for 1/4" Square or cathedral only
$240 for any 1/2" phenolic
$425 for any 1" phenolic
=====================================
LSA Cathedral to Square Port Adapters
LSA Cathedral to Square Port Adapters
Our original flagship product!!! The 1" Version is NO LONGER IN NORMAL PRODUCTION, and will be a special order only. These adapters will let you bolt any Square Port (LSA/LS9?Maggie/Whipple, etc) Supercharger to an engine with cathedral port heads!

Pricing: $Special Order Only
=====================================
LSA Lid Spacers
LSA Lid Spacers
These spacers help create a larger plenum volume, and the phenolic versions help with heatsoak into the blower lid. Either material can be drilled for spray bars. Come with spacer, correct length hardware, and a rope gasket for the bottom. Does not include an additional cooler brick gasket (2 total needed).

Pricing:
1/2" Billet/Phenolic $375
3/4" Billet/Phenolic $450
1" Billet/Phenolic $550
=====================================
LSA/9/Heartbeat Fabricated Fuel Rails
LSA/9/Heartbeat Fabricated Fuel Rails
Ready to make some big HP? Need to run a return style fuel system? Want something that looks awesome for your custom LSA, LS9 or Magnuson Heartbeat? These rails are made from 6061 and CNC machined to accept a factory injector. Each set is tested to 120PSI in house.

Pricing:
Rails with stock inlet or-6AN: $475
Rails with -8AN Fittings: $500
Rails with -10AN Fittings: $525
Crossover Kit -6AN: $45
Crossover Kit -8AN: $60
Crossover Kit -10AN: $85
Black Powdercoat: $30
Custom Colors: Call
Additional Fittings: Call

*Please Note, all fuel rails and custom modified parts are NOT returnable, and due to demand lead times will vary and cannot be guaranteed!!!
=====================================
LSA GM Truck/SUV Front Drive
LSA GM Truck/SUV Front Drive
For all GM full size trucks, SUV's, and vans from 1999-2014 using the standard truck front drive. This adds the ability to run the LSA blower with maximum belt wrap for better performance and less belt slip! All kits come with brackets, hardware, spacers, idlers, and instructions. No belt is included.

Pricing:
Bare Bracket $360
Black Only Bracket/Hardware $375
=====================================
TBSS Only SUV Kit
TBSS Only SUV Kit
For TBSS applications or applications that want to run TBSS power steering pumps only. This adds the ability to run the LSA blower with maximum belt wrap for better performance and less belt slip! All kits come with brackets, hardware, spacers, idlers, and instructions. No belt is included.

This kit also replaces the stock power steering reservoir with a new aftermarket one. There are 2 different fluid return fittings, standard 3/8" hose or -6AN, specify when ordering.

Pricing:
Bare Bracket $385
Black Bracket $400
=====================================
CTSV1/G8/SS/Corvette LSA Front Drive
CTSV1/G8/SS/Corvette LSA Front Drive
This kit works with factory C5/C6 corvette 6 rib belt setups, as well as the first generation CTSV, G8, and Chevy SS. The blower snout must by machined at our location to allow the pulley to fit. Kit comes with pulley, machine work, pulley install, bracket kit and idler, and shipping. Vettes will need the power steering reservoir moved slightly, this is not a part of the kit. All kits support 8 rib IW accessory drive kits.

All but SS Pricing: $625
SS Kit Pricing: $675
=====================================
Fbody/GTO LSA Front Drive Kit
Fbody/GTO LSA Front Drive Kit
This kit allows you to bolt an LSA blower on any LS engine with an Fbody or GTO front accessory drive. Comes with brackets, spacers, and an idler. Also includes an upper LSA pulley in 2.45". Note: For cathedral head applications you will need the cathedral to square port adapters.

Pricing:
Complete Kit $360
=====================================
1/2" Billet Throttle Body Spacers
1/2" Billet Throttle Body Spacers
For tight fitments and running different throttle bodies, these can eliminate clearance issues with LSA blower pulleys and throttle body motors. These can also be made with threaded bolt holes for custom intake applications.

Pricing:
$45 Shipped
=====================================
1" Billet Throttle Body Spacers
1" Billet Throttle Body Spacers
For tighter fitments and running different throttle bodies, these can eliminate clearance issues with LSA blower pulleys and throttle body motors. These can also be drilled and tapped for IAT1, Meth, or NOS nozzles if needed.

Pricing:
$75 Shipped
=====================================
Driveshaft Adapters
Driveshaft Adapters
Have a newer 6 speed trans and need to run an old style driveshaft? These are the perfect solution. We carry these to convert the flanged output shaft to a standard 4 bolt U-Joint flange (available at any driveline shop). These are available for TR6060, 6L80E, and 6L90E configurations. Grabe 8 hardware included!

Pricing:
$145 Shipped
=====================================
LSA/LS9 Lid Adapter
LSA/LS9 Lid Adapter
Want to run an LS9 blower but dont want to have to buy the expensive and problem prone LS9 lid? Here is your solition. This adapter goes between an LS9 blower and LSA lid, and allows the cheaper more robust lid to be used. Comes with longer bolts, gasket cord, and instructions.

Pricing
$400.00
=====================================
LSA Truck/SUV Coolant Tank
LSA Truck/SUV Coolant Tank
These tanks mount in the stock GM Battery tray. Made specifically for 99-06 NBS Trucks and SUVS. May fit other applications. Had provisions for standard battery mount hardware at the bottom. Can be made with either -10AN, -12AN, or 3/4"NPT bungs. Other Configurations available.

Pricing:
$200.00 Bare
$260.00 Black Powdercoat
Website Builder provided by  Vistaprint